Epiroc DM45/DM50 parts
If you are looking for Epiroc parts for the DM45/DM50, you will find them in our online Epiroc spare parts shop.
DM45/DM50
Powerful rotary tricone and down the hole hammer drill for 140mm -225mm (5-1/2” to 8-7/8”) holes.
Electronic Air Regulation System (EARS) is standart
Multiple engine and air compressor options
High speed feed and retract
Look to the DM series of drills for the best value in quality, productivity and reliability to achieve your blasthole drilling objectives.
• The robust DM45/50 mainframe and tower design ensure a high asset life even in some of the toughest mining conditions. The double cut structural tower lacing ensures a strong tower structure without the added weight of less efficient designs.
• A spacious one piece FOPS (Falling Object Protective Structure) rated cab with electric over hydraulic controls that are common with the DM30 II and DML make the DM45/50 easy to operate, especially for drillers who have experience in other DM series machines.
• For single pass applications the DM45/50 can achieve a clean hole depth of 8.5 m (27.4 ft) and for multi pass depth can achieve depths of up to 53.3 m (175 ft).
• When more air and pulldown are required, the DM45 evolves into a DM50 to give added flexibility to the larger hole sizes in the DM45/50 range.
Technical Specifications
Product series: DM series
Drilling method: Rotary and DTH - Multi pass
Hole diameter: 149 - 229 mm
Hydraulic pulldown: 200 kN
Hydraulic pullback: 98 kN
Weight on bit: 20400 kg
Single pass depth: 8.5 m
Maximum hole depth: 53.3 m
Estimated weight: 35 - 41 t
![Heavy Equipments logo](https://en.hespareparts.com/image/data/loglogo.png)