Volvo tooth system

Parts reference guide

VOLVO tooth system – discover the difference

The bucket’s tooth system is exposed to extreme stresses when it encounters a combination of hard materials, shocks and high

breakout forces. In that environment it’s impossible to eliminate wear

– but it is possible to reduce the effect it has on the tooth system. The great challenge is designing a tooth system that is optimized for the forces and wear to which it is exposed. Such a tooth system gives optimum service life with maintained performance. Volvo has faced that challenge and succeeded. Discover the difference.

Success is built from the ground up

It is important that the tooth system is engineered correctly and that it has the right design to give optimized efficiency and the longest possible wear life.

Volvo tooth system is another result of Volvo’s commitment to innovation and development. The tooth system has undergone extensive field testing in various types of materials and applications to analyze and to ensure its high quality and good characteristics.

It has shown several advantages, for example:

The teeth have a self-sharpening design which gives them long-lasting good penetration capability and high productivity.
Strategically placed wear material in the

thooth design provides maximum wear life.
The correct fit between the tooth and adapter, as well as large stabilizing surfaces, provides a very strong unit which can withstand high tolerance from forces and stresses.
High-quality steel alloy increases wear

resistance.
A vertical patented locking device makes

mounting and removing fast and easy.

High quality

When choosing steel, there is no compromising. Volvo’s teeth have the right balance between hardness and high tension steel, which is the key to quality and long wear life.

The teeth consist of a specifically designed steel alloy, with a hardness of approx. 500 Brinell, dependant on the type and size of the tooth.

From the selection of raw materials for the molten steel to blasting and heat treatment of the finished teeth, continuous checks and measurements are performed to avoid any deviations with regards to steel quality, technical specifications and the fit of the tooth and adapter.

Wide product range

In the Volvo Tooth System range, there are teeth and adapters for all types of applications, from handling easily broken bank materials to breaking out hard and rocky materials, such as shot rock.

The adapters are developed to fit new Volvo buckets, as well as accommodate bucket rebuilds for older machines from Volvo Construction Equipment.

For instructions about welding on different types of adapters on buckets, contact your nearest Volvo Construction Equipment dealer.

Total operating economy is the key

Design and material selection make Volvo tooth system the obvious choice for all applications.

Better penetration capability gives:

better and faster bucket filling
less wear of bucket, machine and tires
lower fuel consumption

Long service life due to:
strategically placed wear material
High-quality steel alloy
self-sharpening design
correct fit between adapter and tooth

Shorter downtime when changing gives:
lower maintenance costs
increased productivity

Self- sharpening teeth

Due to their profile, the teeth have a small penetration area, which gives

reduced penetration force. This provides better bucket fill factor, lower fuel consumption as well as reduced wear on bucket, machine and tires.

The self-sharpening

design and strategically placed wear material give maximum wear

life with maintained performance.

5

Locking device

The unique positive locking device integrates the locking pin completely in the adapter body. Position and design give complete protection. The locking device

consists of two components: one reusable steel pin as well as an elastic and flexible lock retainer. The design of the tooth and adapter gives a smooth transfer of forces, without

the locking device having to absorb the

stresses, resulting in a locking device with significantly longer service life.

Two parts, one unit

A perfect fit between the tooth and adapter, together with large stabilizing surfaces, provides a very strong unit with minimal internal wear. Stresses are reduced due to minimum

movement between the tooth and adapter.

Robust design

Reinforced area that protects the adapter and the tooth’s guide lugs from early wear.

Segments between teeth (for

You get a number of advantages with segments between the teeth. They give:
- Up to five times longer service life for the cutting edge than without
  
  protection between the teeth.
- Protection of the bucket floor.
- Longer adapter service life.
- Prevent uneven wear of the cutting edge.

Guide tables Volvo tooth system for skidsteer loaders

Machine model	Volvo Part No	Description	Designation	Type/application	Weight kg
Volvo
MC60/B-110/B	VOE 15633941	Adapter	LA5FC20	Flush-mounted	1.3
	VOE 15603434	Adapter	LA5FCB16	Bolt-on	1.7
	VOE 969987	Screw	M16 L = 50 mm
	VOE 979021	Nut	M16
	VOE 15603431	Tooth	5GPC	General Purpose	0.7
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

Guide tables Volvo tooth system for compact wheel loaders

Machine model	Volvo Part No	Description	Designation	Type/application	Weight kg
Volvo
L20B-L35/B	VOE 15633938	Adapter	LA8FC20	Flush-mounted	1.8
	VOE 15603435	Tooth	8GPC	General Purpose	1.2
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

L40/B-L50F	VOE 11417088	Adapter	LA10FC25	Flush-mounted	3.7
	VOE 11417118	Tooth	10GPL	General Purpose	2.4
	VOE 11417144	Locking device, complete*)	10P		0.03
	VOE 11417315	Retainer	10R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

Guide tables Volvo tooth system for backhoe loaders

Machine model	Volvo Part No	Description	Designation	Type/application	Weight kg
Volvo
Loader bucket
BL60/61-70/71	VOE 15633938	Adapter	LA8FC20	Flush-mounted	1.8
	VOE 15603435	Tooth	8GPC	General Purpose	1.2
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

	VOE 15603438	Monobloc tooth	MB8	Tooth and adapter in one piece	2.4
	VOE 11081028	Screw	M20 L= 70 mm
	VOE 979022	Nut	M20

Excavator bucket
BL60/61-70/71	VOE 15633940	Adapter	EA8BL20	Bottom leg 1 1/2 (long bottom leg)	2.0
	VOE 15603435	Tooth	8GPC	General Purpose	1.2
	VOE 15625775	Tooth	8PPC	Extremely compact material	1.0
	VOE 15625776	Tooth	8TPC	Extremely compact material	1.5
	VOE 15625774	Tooth	8SNC	Levelling, cleaning, grading and backfilling	1.4
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

	VOE 15603438	Monobloc tooth	MB8	Tooth and adapter in one piece	2.4
	VOE 11081028	Screw	M20 L= 70 mm
	VOE 979022	Nut	M20

*) Locking device complete consists of pin and retainer.

Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

Guide tables Volvo tooth system for compact excavators

Machine model	Volvo Part No	Description	Designation	Type/application	Weight kg
Volvo
EC35/C-ECR38	VOE 15633939	Adapter	EA5BLU	Bottom leg universal	1.2
	VOE 15603431	Tooth	5GPC	General Purpose	0.7
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

	VOE 15603438	Monoblock tooth	MB8	Tooth and adapter in one piece	2.4
	VOE 11081028	Screw	M20 L= 70 mm
	VOE 979022	Nut	M20

EC45-EC70	VOE 15633940	Adapter	EA8BL20	Bottom leg 1 1/2 (long bottom leg)	2.0
ECR48C- ECR88	VOE 15603435	Tooth	8GPC	General Purpose	1.2
	VOE 15625775	Tooth	8PPC	Extremely compact material	1.0
	VOE 15625776	Tooth	8TPC	Extremely compact material	1.5
	VOE 15625774	Tooth	8SNC	Levelling, cleaning, grading and backfilling	1.4
	VOE 15603422	Locking device, complete*)	5/8P		0.03
	VOE 15603429	Retainer	5/8R
	VOE 11417167	Tool	5/10T	Tool for mounting and removal of teeth	0.9

	VOE 15603438	Monoblock tooth	MB8	Tooth and adapter in one piece	2.4
	VOE 11081028	Screw	M20 L= 70 mm
	VOE 979022	Nut	M20

*) Locking device complete consists of pin and retainer

Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

Guide tables Volvo tooth system for wheel loaders

Machine model Volvo	Volvo Part No	Description	Designation	Type/application	Weight kg
L50/E	VOE 11417086	Adapter	LA10FC20	Flush-mounted	3.6
	VOE 11417087 VOE 13955370 VOE 13968904 VOE 11417118	Adapter Screw Nut Tooth	LA10BN20 M16 L=70 mm M16 10GPL	Bolt-on General Purpose	4.9 2.4
	VOE 11417119	Tooth	10AML	Abrasive Material	2.5
	VOE 11417144 VOE 11417315 VOE 11417167	Locking device, complete*) Retainer Tool	10P 10R 5/10T	Standard Standard Tool for mounting and removal of teeth	0.03 0.9
L60E/F	VOE 11417088	Adapter	LA10FC25	Flush-mounted	3.7
L70/F	VOE 11417190	Adapter (for L70/F)	LA10TL25	Top leg 1 1/2 (long top leg)	4.0
	VOE 11417089 VOE 13955370 VOE 13968904 VOE 11417118	Adapter Screw Nut Tooth	LA10BN25 M16 L=70 mm M16 10GPL	Bolt-on General Purpose	5.2 2.4
	VOE 11417119	Tooth	10AML	Abrasive Material	2.5
	VOE 11417144 VOE 11417315 VOE 11417167	Locking device, complete*) Retainer Tool	10P 10R 5/10T	Standard Standard Tool for mounting and removal of teeth	0.03 0.9
L90/F	VOE 11417094	Adapter	LA15FC30	Flush-mounted	6.1
	VOE 11417095	Adapter	LA15TL30	Top leg 1 1/2 (long top leg)	6.3
	VOE 11417096 VOE 978950 VOE 13976433 VOE 11417125	Adapter Screw Nut Tooth	LA15BN30 M20 L=80 mm M20 15GPL	Bolt-on General Purpose	6.8 3.4
	VOE 11417126	Tooth	15AML	Abrasive Material	4.3
	VOE 11417127	Tooth	15AMXL	Abrasive Material with extra wear metal	5.0
	VOE 11417145 VOE 11417316 VOE 11716119 VOE 11417164	Locking device, complete*) Retainer Retainer Corner adapter	15P 15/20R 15/20MR LA15CR30	Standard Standard Heavy duty Bolt-on	0.07 9.5
	VOE 13806546 VOE 13960150 VOE 13806833 VOE 11417168	Screw Washer Nut Tool	1 1/4” UNC 31x58 1 1/4” UNC 15/30T	Tool for mounting and removal of teeth	1.1
L110E/F	VOE 11417097	Adapter	LA15FC35	Flush-mounted	6.8
L120/F	VOE 11417098	Adapter	LA15TL35	Top leg 1 1/2 (long top leg)	6.2
	VOE 11417099 VOE 978951 VOE 13976433 VOE 11417126	Adapter Screw Nut Tooth	LA15BN35 M20 L=90 mm M20 15AML	Bolt-on Abrasive Material	8.0 4.3
	VOE 11417127	Tooth	15AMXL	Abrasive Material with extra wear metal	5.0
	VOE 11417145 VOE 11417316 VOE 11716119 VOE 11417164	Locking device, complete*) Retainer Retainer Corner adapter	15P 15/20R 15/20MR LA15CR30	Standard Standard Heavy duty Bolt-on	0.07 9.5
	VOE 13806546 VOE 13960150 VOE 13806833 VOE 11417168	Screw Washer Nut Tool	1 1/4” UNC 31x58 1 1/4” UNC 15/30T	Tool for mounting and removal of teeth	1.1
	VOE 15052827	Adapter	LA20FC35	Flush-mounted	10.3
	VOE 15052849	Adapter	LA20TL35	Top leg 1 1/2 (long top leg)	9.0
	VOE 15052776 VOE 978951 VOE 13976433 VOE 11417128	Adapter Screw Nut Tooth	LA20BN35 M20 L=90 mm M20 20GPL	Bolt-on General Purpose	10.5 5.7
	VOE 11417129	Tooth	20AML	Abrasive Material	6.1
	VOE 11438859	Tooth	20AMRL	Rock and highly abrasive materials	7.6
	VOE 11417146 VOE 11417316 VOE 11716119 VOE 11417168	Locking device, complete*) Retainer Retainer Tool	20P 15/20R 15/20MR 15/30T	Standard Standard Heavy duty Tool for mounting and removal of teeth	0.1 1.1
L150/F	VOE 11417105	Adapter	LA20FC40	Flush-mounted	8.8
L180/F	VOE 11417106	Adapter	LA20TL40	Top leg 1 1/2 (long top leg)	8.7
	VOE 11417107 VOE 963361 VOE 930853 VOE 948836 VOE 11417128	Adapter Screw Washer Nut Tooth	LA20BN40 M24 L=100 mm 25x45 M24 20GPL	Bolt-on General Purpose	10.3 5.7
	VOE 11417129	Tooth	20AML	Abrasive Material	6.1
	VOE 11438859	Tooth	20AMRL	Rock and highly abrasive materials	7.6
	VOE 11417146 VOE 11417316 VOE 11716119 VOE 11417165	Locking device, complete*) Retainer Retainer Corner adapter	20P 15/20R 15/20MR LA20CR40	Standard Standard Heavy duty Bolt-on	0.1 13.6
	VOE 963361 VOE 930853 VOE 948836 VOE 11417168	Screw Washer Nut Tool	M24 L=100 mm 25x45 M24 15/30T	Tool for mounting and removal of teeth	1.1

*) Locking device complete consists of pin and standard retainer. **) Locking device complete consists of pin, hot slag retainer and two springs.

***) Retainer complete consists of hot slag retainer and two springs. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

Guide tables Volvo tooth system for excavators

Machine model Volvo	Volvo Part No	Description	Designation	Type/application	Weight kg
EC/EW140/C	VOE 14522960	Adapter	EA15BL30	Bottom leg 1 1/2 (long bottom leg)	5.9
ECR145C	VOE 14523551	Tooth	15GPE	General Purpose	3.1
EW145B	VOE 14524192	Tooth	15AMRE	Abrasive material with extra wear metal	3.6
EC/EW160/C	VOE 14530835	Tooth	15PPE	Extremely compact material	2.8
EC/EW180/C	VOE 14530836	Tooth	15TPE	Extremely compact material	3.7
	VOE 14531280	Tooth	15SNE	Levelling, cleaning, grading and backfilling	3.8
	VOE 11417145 VOE 11417316 VOE 11716119 VOE 11417168	Locking device, complete*) Retainer Retainer Tool	15P 15/20R 15/20MR 15/30T	Standard Standard Heavy duty Tool for mounting and removal of teeth	0.07 1.1
EC/EW210/C	VOE 14522961	Adapter	EA20BL40	Bottom leg 1 1/2 (long bottom leg)	10.4
	VOE 14523655	Tooth	20GPE	General Purpose	4.5
	VOE 14526753	Tooth	20AMRE	Abrasive material with extra wear metal	5.4
	VOE 14531279	Tooth	20PPE	Extremely compact material	4.0
	VOE 14531283	Tooth	20TPE	Extremely compact material	5.4
	VOE 14531281	Tooth	20SNE	Levelling, cleaning, grading and backfilling	5.8
	VOE 11417146 VOE 11417316 VOE 11716119 VOE 11417168	Locking device, complete*) Retainer Retainer Tool	20P 15/20R 15/20MR 15/30T	Standard Standard Heavy duty Tool for mounting and removal of teeth	0.1 1.1
EC/EW210/C–	VOE 14522962	Adapter	EA30BL40	Bottom leg 1 1/2 (long bottom leg)	12.5
EC240/C	VOE 14523552	Tooth	30GPE	General Purpose	6.7
	VOE 14523946	Tooth	30AMRE	Abrasive material with extra wear metal	7.8
	VOE 14526514	Tooth	30PPE	Extremely compact material	5.6
	VOE 14530837	Tooth	30TPE	Extremely compact material	6.9
	VOE 14530841	Tooth	30SNE	Levelling, cleaning, grading and backfilling	8.4
	VOE 11417147 VOE 11417317 VOE 11716120 VOE 15002778	Locking device, complete) Retainer Retainer Locking device, complete*)	30P 30/40R 30/40MR 30PHS	Standard Standard Heavy duty Hot slag	0.15 0.2
	VOE 15002854	Retainer***)	30/40MRS	Hot slag	0.03
	VOE 11417168	Tool	15/30T	Tool for mounting and removal of teeth	1.1
EC290/C	VOE 14522963	Adapter	EA40BL50	Bottom leg 1 1/2 (long bottom leg)	20.1
ECR305C	VOE 14523553	Tooth	40GPE	General Purpose	9.4
	VOE 14526754	Tooth	40AMRE	Abrasive material with extra wear metal	11.5
	VOE 14526515	Tooth	40PPE	Extremely compact material	8.1
	VOE 14530838	Tooth	40TPE	Extremely compact material	10.6
	VOE 14530842	Tooth	40SNE	Levelling, cleaning, grading and backfilling	12.9
	VOE 14524860 VOE 11417317 VOE 11716120 VOE 15002890	Locking device, complete) Retainer Retainer Locking device, complete*)	40P 30/40R 30/40MR 40PHS	Standard Standard Heavy duty Hot slag	0.2 0.3
	VOE 15002854	Retainer***)	30/40MRS	Hot slag	0.03
	VOE 15120568	Tool	40/55T	Tool for mounting and removal of teeth	1.3
EC330/C	VOE 15034957	Adapter	EA55BLX50	Extra long top leg	24.5
EC360/C	VOE 14524191	Tooth	55GPE	General Purpose	13.0
EC460/C	VOE 14523656	Tooth	55AMRE	Abrasive material with extra wear metal	15.9
	VOE 14526516	Tooth	55PPE	Extremely compact material	11.7
	VOE 14530839	Tooth	55TPE	Extremely compact material	14.7
	VOE 14530843	Tooth	55SNE	Levelling, cleaning, grading and backfilling	17.8
	VOE 11417148 VOE 11417318 VOE 11716121 VOE 15002928	Locking device, complete) Retainer Retainer Locking device, complete*)	55P 55/65R 55/65MR 55PHS	Standard Standard Heavy duty Hot slag	0.3 0.4
	VOE 15002939	Retainer***)	55/65MRS	Hot slag	0.05
	VOE 15120568	Tool	40/55T	Tool for mounting and removal of teeth	1.3
EC460/C	VOE 14526776	Adapter	EA65BL50	Bottom leg 1 1/2 (long bottom leg)	31.6
	VOE 14522964	Adapter	EA65BL60	Bottom leg 1 1/2 (long bottom leg)	34.6
	VOE 14526510	Tooth	65GPE	General Purpose	16.0
	VOE 14522959	Tooth	65AMRE	Abrasive material with extra wear metal	21.1
	VOE 14526517	Tooth	65PPE	Extremely compact material	15.7
	VOE 14530840	Tooth	65TPE	Extremely compact material	20.1
	VOE 14531282	Tooth	65SNE	Levelling, cleaning, grading and backfilling	28.1
	VOE 14524710 VOE 11417318 VOE 11716121 VOE 15002951	Locking device, complete) Retainer Retainer Locking device, complete*)	65P 55/65R 55/65MR 65PHS	Standard Standard Heavy duty Hot slag	0.4 0.5
	VOE 15002939	Retainer***)	55/65MRS	Hot slag	0.05
	VOE 14599919	Tool	65/125T	Tool for mounting and removal of teeth	1.8
EC700/C	VOE 14526788	Adapter	EA80BL65	Bottom leg 1 1/2 (long bottom leg)	40.8
	VOE 14526509	Adapter	EA80BL70	Bottom leg 1 1/2 (long bottom leg)	40.1
	VOE 14526511	Tooth	80GPE	General Purpose	23.0
	VOE 14526512	Tooth	80AMRE	Abrasive material with extra wear metal	27.5
	VOE 14526518	Tooth	80PPE	Extremely compact material	20.2
	VOE 14531655	Tooth	80TPE	Extremely compact material	25.5
	VOE 14524711 VOE 14526513 VOE 11716122 VOE 15002956	Locking device, complete) Retainer Retainer Locking device, complete*)	80P 80/125R 80MR 80PHS	Standard Standard Heavy duty Hot slag	0.50 0.7
	VOE 15002958	Retainer***)	80MRS	Hot slag	0.09
	VOE 14599919	Tool	65/125T	Tool for mounting and removal of teeth	1.8

*) Locking device complete consists of pin and standard retainer **) Locking device complete consists of pin, hot slag retainer and two springs.

***) Retainer complete consists of hot slag retainer and two springs. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

Heavy Duty, guide tables Volvo tooth system for excavators

Machine model	Volvo Part No	Description	Designation	Type/application	Weight kg
Volvo
EC/EW140/C	VOE 14595188	Adapter	EA20BLX30	Extra long top leg	11.2
ECR145C	VOE 14526753	Tooth	20AMRE	Abrasive material with extra wear metal	5.4
EW145B	VOE 11417146	Locking device, complete*)	20P	Standard	0.1
EC/EW160C	VOE 11417316	Retainer	15/20R	Standard
EC/EW180/C	VOE 11716119	Retainer	15/20MR	Heavy Duty
	VOE 11417168	Tool	15/30T	Tool for mounting and removal of teeth	1.1

EC/EW210/C	VOE 14595189	Adapter	EA30BLX40	Extra long top leg	14.0
	VOE 14523946	Tooth	30AMRE	Abrasive material with extra wear metal	7.8
	VOE 11417147	Locking device, complete*)	30P	Standard	0.15
	VOE 11417317	Retainer	30/40R	Standard
	VOE 11716120	Retainer	30/40MR	Heavy Duty
	VOE 11417168	Tool	15/30T	Tool for mounting and removal of teeth	1.1

EC235C	VOE 14595190	Adapter	EA40BLW40	Extra long top leg for wear cap	23.1
ECR235C	VOE 14595195	Wear cap	40W		2.3
EC240/C	VOE 14526754	Tooth	40AMRE	Abrasive material with extra wear metal	11.5
	VOE 14524860	Locking device, complete*)	40P	Standard	0.2
	VOE 11417317	Retainer	30/40R	Standard
	VOE 11716120	Retainer	30/40MR	Heavy Duty
	VOE 15120568	Tool	40/55T	Tool for mounting and removal of teeth	1.3

EC290/C	VOE 14595191	Adapter	EA55BLW50	Extra long top leg for wear cap	32.0
ECR305C	VOE 14595196	Wear cap	55W		3.0
	VOE 14523656	Tooth	55AMRE	Abrasive material with extra wear metal	15.9
	VOE 11417148	Locking device, complete*)	55P	Standard	0.3
	VOE 11417318	Retainer	55/65R	Standard
	VOE 11716121	Retainer	55/65MR	Heavy Duty
	VOE 15120568	Tool	40/55T	Tool for mounting and removal of teeth	1.3

EC330/C	VOE 14595192	Adapter	EA65BLW50	Extra long top leg for wear cap	42.0
EC360/C	VOE 14595197	Wear cap	65W		4.0
	VOE 14522959	Tooth	65AMRE	Abrasive material with extra wear metal	21.1
	VOE 14524710	Locking device, complete*)	65P	Standard	0.4
	VOE 11417318	Retainer	55/65R	Standard
	VOE 11716121	Retainer	55/65MR	Heavy Duty
	VOE 14599919	Tool	65/125T	Tool for mounting and removal of teeth	1.8

EC460/C	VOE 14595193	Adapter	EA80BLW60	Extra long top leg for wear cap	53.0
	VOE 14595198	Wear cap	80W		4.7
	VOE 14526512	Tooth	80AMRE	Abrasive material with extra wear metal	27.5
	VOE 14524711	Locking device, complete*)	80P	Standard	0.5
	VOE 14526513	Retainer	80/125R	Standard
	VOE 11716122	Retainer	80MR	Heavy Duty
	VOE 14599919	Tool	65/125T	Tool for mounting and removal of teeth	1.8

EC700/C	VOE 14595194	Adapter	EA125BLW70	Extra long top leg for wear cap	77.2
	VOE 14595199	Wear cap	125W		8.0
	VOE 14595226	Tooth	125AMRE	Abrasive material with extra wear metal	38.3
	VOE 14595225	Locking device, complete*)	125P	Standard	0.8
	VOE 14526513	Retainer	80/125R	Standard
	VOE 11716122	Retainer	80MR	Heavy Duty
	VOE 14599919	Tool	65/125T	Tool for mounting and removal of teeth	1.8

Volvo parts

*) Locking device complete consists of pin and standard retainer. Note: Volvo Tooth System will also fit older machines from Volvo Construction Equipment.

Teeth and adapters for loader buckets

GPC/GPL General purpose tooth that gives the bottom of the bucket a smooth and clean profile. Self-sharpening.

AMRL Tooth for highly abrasive material and rock handling whith a focus on long service life. Undercuts slightly to give the cutting edge optimum protection. Self-sharpening.

BN Two leg adapter bolted to the bucket edge. Gives the cutting edge optimum protection. Should NOT be used in heavy duty applications.

FCB One leg adapter bolted to the bucket edge. Gives the bottom of the bucket a smooth and clean profile.

P Locking device for tooth and adapter consists of a lock retainer and a reusable steel pin. When it’s time to change adapter, it’s also suitable to change the complete locking device.

MR Heavy duty retainer in steel/polyure- thane for work in very wet fine-grained clay and coal handling.

PHS Steel locking for hot slag applications. Consists of a reusable steel pin, a steel retainer and two springs.

AML Tooth for abrasive material handling and where extra penetration is required. Undercuts slightly to give the cutting edge optimum protection. Self-sharpening.

FC Flush-mounted weld-on adapter for loader

and planing (leveling) buckets. Gives the bottom of the

bucket a smooth and clean profile. Commonly com- bined with GPC/GPL tooth and NOT in combination with segments.

CR Bolt-on corner adapters protect the bucket corners.

MB Monoblock tooth. Tooth and adapter in one piece.

AMXL Tooth for abrasive material handling with extra large bottom surface on the wear shoe. Provides good penetration capacity in combination with long service life. Undercuts slightly to give the cutting edge optimum protection. Self-sharpening.

TL 1½ top leg adapter (long top leg), for welding to both sides of the cutting edge. Should be used in heavy duty applications.

BPL Bolt-on cast segments protect the bucket edge

between the points.

iMPoRTANT: We recommend using

segments together with 1½ leg adapters or bolt-on

adapters, but NEVER with flush-mounted adapters.

T Tool for easy mounting and removal of

locking devices.

Teeth and adapters for loader buckets

C GPC/GPL TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

5GPC	VOE 15603431	126	50	55	52	0.7
8GPC	VOE 15603435	164	58	64	62	1.2
10GPL	VOE 11417118	187	75	81	77	2.4
15GPL	VOE 11417125	227	81	95	89	3.4
20GPL	VOE 11417128	253	102	108	99	5.7
30GPL	VOE 11417134	287	107	122	115	7.3
55GPL	VOE 11417137	351	135	155	146	13.9

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

10AML	VOE 11417119	195	45	81	77	2.5
15AML	VOE 11417126	231	52	95	89	4.3
20AML	VOE 11417129	256	63	108	99	6.1
30AML	VOE 11417135	290	74	124	115	9.1
55AML	VOE 11417138	365	96	156	146	17.8

Designation

Volvo Part No

A mm

B mm

C mm

D mm

Weight kg

15AMXL

VOE 11417127

231

103

5.0

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

20AMRL	VOE 11438859	246	114	109	101	7.6
30AMRL	VOE 11417136	281	127	122	115	10.7
40AMRL	VOE 11438886	331	144	136	127	16.1
55AMRL	VOE 11417139	354	163	156	146	21.7

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	Weight kg

LA5FC20	VOE 15633941	20	25	167	56	1.3
LA8FC20	VOE 15633938	20	25	192	66	1.8
LA10FC20	VOE 11417086	20	25	237	80	3.6
LA10FC25	VOE 11417088	25	25	259	80	3.7
LA15FC30	VOE 11417094	30	25	299	92	6.1
LA15FC35	VOE 11417097	35	25	307	94	6.8
LA20FC35	VOE 15052827	35	25	360	106	10.3
LA20FC40	VOE 11417105	40	25	356	108	8.8
LA30FC40	VOE 11417108	40	25	385	124	12.7
LA55FC65	VOE 11417116	65	30	484	156	23.0

B A FC FLuSH-MouNTED ADAPTERS

TL ToP LEG 1 1/2 (LoNG ToP LEG) ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	Weight kg

LA10TL25	VOE 11417190	25	25	244	80	4.0
LA15TL30	VOE 11417095	30	25	292	95	6.3
LA15TL35	VOE 11417098	35	25	292	96	6.2
LA20TL35	VOE 15052849	35	25	328	107	9.0
LA20TL40	VOE 11417106	40	25	321	107	8.7
LA30TL40	VOE 11417109	40	25	354	119	12.0
LA40TL40	VOE 11438928	40	25	408	140	19.8
LA40TL50	VOE 11438929	50	25	410	139	20.1
LA55TL65	VOE 11417117	65	30	463	155	26.6

BN BoLT-oN ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	C mm	D mm	Weight kg

LA10BN20	VOE 11417087	20	25	277	80	86	69	4.9
LA10BN25	VOE 11417089	25	25	289	80	87	78	5.2
LA15BN30	VOE 11417096	30	25	315	94	87	78	6.8
LA15BN35	VOE 11417099	35	25	361	94	111	100	8.0
LA20BN35	VOE 15052776	35	25	376	107	111	100	10.5
LA20BN40	VOE 11417107	40	25	387	107	100	110	10.3
LA30BN40	VOE 11417115	40	25	395	117	100	110	11.7

Teeth and adapters for loader buckets

B FCB BoLT-oN ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	Weight kg

LA5FCB16	VOE 15603434	16	20	193	58	1.7

CR BoLT-oN CoRNER ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	C mm	D mm	E mm	Weight kg

LA15CR30	VOE 11417164	30/35	25	329	94	–	167/171	23	9.5
LA20CR40	VOE 11417165	40	25	413	108	81	151	28	13.6
LA30CR40	VOE 11417166	40	25	425	118	81	153	28	16.3

Designation	Volvo Part No	Description	Length (L) mm	Weight kg

5/8P	VOE 15603422	Locking device, complete*)	42	0.03
5/8R	VOE 15603429	Retainer, standard	22	–

10P	VOE 11417144	Locking device, complete*)	44	0.03
10R	VOE 11417315	Retainer, standard	28	–

15P	VOE 11417145	Locking device, complete*)	67	0.07
15/20R	VOE 11417316	Retainer, standard	39	–
15/20MR	VOE 11716119	Retainer, heavy duty	39	–

20P	VOE 11417146	Locking device, complete*)	76	0.1
15/20R	VOE 11417316	Retainer, standard	39	–
15/20MR	VOE 11716119	Retainer, heavy duty	39	–

30P	VOE 11417147	Locking device, complete*)	87	0.15
30/40R	VOE 11417317	Retainer, standard	51	–
30/40MR	VOE 11716120	Retainer, heavy duty	51	–

40P	VOE 14524860	Locking device, complete*)	97	0.2
30/40R	VOE 11417317	Retainer, standard	51	–
30/40MR	VOE 11716120	Retainer, heavy duty	51	–

55P	VOE 11417148	Locking device, complete*)	108	0.3
55/65R	VOE 11417318	Retainer, standard	64	–
55/65MR	VOE 11716121	Retainer, heavy duty	64	–

LoCKiNG DEViCES, HoT SLAG

Designation	Volvo Part No	Description	Length (L) mm	Weight kg

30PHS	VOE 15002778	Locking device, complete*)	94	0.2
30/40MRS	VOE 15002854	Retainer, complete, hot slag**)	50	0.03

40PHS	VOE 15002890	Locking device, complete*)	105	0.3
30/40MRS	VOE 15002854	Retainer, complete, hot slag**)	50	0.03

55PHS	VOE 15002928	Locking device, complete*)	117	0.4
55/65MRS	VOE 15002939	Retainer, complete, hot slag**)	62	0.05

*) Locking device complete consists of pin, retainer and two springs.

**) Retainer complete consists of retainer and two springs.

SEGMENTS

Designation

Volvo Part No

Cutting Edge Thickness mm

Cutting Edge Angle °

A mm

B mm

C mm

Weight kg

BPL55BN65

VOE 11417149

378

336

112

39.5

TooLS FoR MouNTiNG AND REMoVAL

Designation	Volvo Part No	Description	Weight kg	For tooth size

5/10T	VOE 11417167	Tool	0.9	5, 8, 10
15/30T	VOE 11417168	Tool	1.1	15, 20, 30
40/55T	VOE 15120568	Tool	1.3	40, 55

MB MoNoBLoCK TooTH

Designation

Volvo Part No

Cutting Edge Thickness mm

Cutting Edge Angle °

A mm

B mm

Weight kg

MB8

VOE 15603438

250

2.4

Dimensions and weights are approximate.

Teeth and adapters for excavator buckets

GPC/GPE General purpose tooth with goood

penetration and long service life. Self-sharpening.

TPC/TPE Twin pick point tooth for work in extremely compact material. Maximum penetration capability in hard clay, frozen ground etc.

Can be used in combination with PPC/PPE.

BLu Weld-on bottom leg universal adapter.

W Wear cap protects the adapter from unnecessary wear.

AMRE Tooth with extra wear metal and longer service life intended for rock and abrasive material. Self-sharpening.

SNC/SNE Spade nose tooth for levelling, cleaning, grading and backfilling.

BLX Bottom leg adapter with extra long top leg for welding to both sides of the cutting edge. Long bot- tom leg.

MB Monoblock tooth. Tooth and adap-

ter in one piece.

PPC/PPE Pick point tooth for work in extremely compact material. Maximum penetration capability in hard clay, frozen ground etc. Can be used in combination with TPC/TPE.

BL 1 ½ bottom leg adapter (long bottom leg), for welding to both sides of the cutting edge.

BLW Bottom leg adapter for wear cap with extra long top leg for welding to both sides of the cutting edge. Long bottom leg.

T Tool for easy mounting and removal of

locking devices.

P Locking device for tooth and adapter consists of a lock retainer and a reusable steel pin. When it’s time to change adapter, it’s also suitable to change the complete locking device.

MR Heavy duty retainer in steel/polyure- thane for work in very wet fine-grained clay and coal handling.

PHS Steel locking for hot slag applica- tions. Consists of a reusable steel pin, a steel retainer and two springs.

Teeth and adapters for excavator buckets

GPC/GPE TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

5GPC	VOE 15603431	126	50	55	52	0.7
8GPC	VOE 15603435	164	58	64	62	1.2
15GPE	VOE 14523551	226	79	95	90	3.1
20GPE	VOE 14523655	256	90	109	99	4.5
30GPE	VOE 14523552	279	105	122	115	6.7
40GPE	VOE 14523553	316	123	136	128	9.4
55GPE	VOE 14524191	358	132	148	145	13.0
65GPE	VOE 14526510	376	138	167	157	16.0
80GPE	VOE 14526511	422	161	193	177	23.0

AMRE TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

15AMRE	VOE 14524192	232	86	95	89	3.6
20AMRE	VOE 14526753	257	99	109	100	5.4
30AMRE	VOE 14523946	284	114	122	115	7.8
40AMRE	VOE 14526754	330	133	137	127	11.5
55AMRE	VOE 14523656	362	139	155	145	15.9
65AMRE	VOE 14522959	403	155	168	157	21.1
80AMRE	VOE 14526512	438	169	191	177	27.5
125AMRE	VOE 14595226	475	183	222	203	38.3

PPC/PPE TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

8PPC	VOE 15625775	173	9	64	62	1.0
15PPE	VOE 14530835	233	11	95	89	2.8
20PPE	VOE 14531279	283	31	111	101	4.0
30PPE	VOE 14526514	310	35	122	115	5.6
40PPE	VOE 14526515	361	36	136	127	8.1
55PPE	VOE 14526516	389	49	156	145	11.7
65PPE	VOE 14526517	440	53	168	156	15.7
80PPE	VOE 14526518	462	59	191	177	20.2

TPC/TPE TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

8TPC	VOE 15625776	173	83	64	62	1.5
15TPE	VOE 14530836	233	104	95	90	3.7
20TPE	VOE 14531283	279	119	109	99	5.4
30TPE	VOE 14530837	309	134	124	116	6.9
40TPE	VOE 14530838	363	154	137	127	10.6
55TPE	VOE 14530839	392	171	157	147	14.7
65TPE	VOE 14530840	442	188	168	157	20.1
80TPE	VOE 14531655	463	197	190	180	25.5

SNC/SNE TEETH

Designation	Volvo Part No	A mm	B mm	C mm	D mm	Weight kg

8SNC	VOE 15625774	163	111	67	62	1.4
15SNE	VOE 14531280	232	127	94	89	3.8
20SNE	VOE 14531281	273	151	111	101	5.8
30SNE	VOE 14530841	300	177	122	114	8.4
40SNE	VOE 14530842	334	207	137	128	12.9
55SNE	VOE 14530843	378	234	155	146	17.8
65SNE	VOE 14531282	419	254	168	157	28.1

BL BoTToM LEG 1 1/2 (LoNG BoTToM LEG) ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	Weight kg

EA8BL20	VOE 15633940	20	25	182	65	2.0
EA15BL30	VOE 14522960	30	30	308	92	5.9
EA20BL40	VOE 14522961	40	30	370	107	10.4
EA30BL40	VOE 14522962	40	30	393	119	12.5
EA40BL50	VOE 14522963	50	30	459	140	20.1
EA55BLX50	VOE 15034957	50	30	459	153	24.5
EA65BL50	VOE 14526776	50	30	532	167	31.6
EA65BL60	VOE 14522964	60	30	529	167	34.6
EA80BL65	VOE 14526788	65	30	541	188	40.8
EA80BL70	VOE 14526509	70	30	541	188	40.1

Teeth and adapters for excavator buckets

Designation

Volvo Part No

Cutting Edge Thickness mm

Cutting Edge Angle °

A mm

B mm

Weight kg

EA5BLU

VOE 15633939

Universal

147

1.2

B BLu BoTToM LEG uNiVERSAL ADAPTERS

A BLX EXTRA LoNG ToP LEG ADAPTERS

Designation	Volvo Part No	Cutting Edge Thickness mm	Cutting Edge Angle °	A mm	B mm	Weight kg

EA20BLX30	VOE 14595188	30	30	370	107	11.2
EA30BLX40	VOE 14595189	40	30	393	119	14.0
EA55BLX50	VOE 15034957	50	30	459	153	24.5

BLW EXTRA LoNG ToP LEG ADAPTERS FoR WEAR CAP

Designation	Volvo Part No	Cutting Ed	ge Cutting Ed	ge A mm	B mm	Weight kg
Thickness mm Angle °
EA40BLW40	VOE 14595190	40	30	459	137	23.1
EA55BLW50	VOE 14595191	50	30	484	156	32.0
EA65BLW50	VOE 14595192	50	30	541	169	42.0
EA80BLW60	VOE 14595193	65	30	586	187	53.0
EA125BLW70	VOE 14595194	70	30	637	220	77.2

W WEAR CAPS

Designation	Volvo Part No	A mm	B mm	C mm	Weight kg

40W	VOE 14595195	112	138	57	2.3
55W	VOE 14595196	132	159	60	3.0
65W	VOE 14595197	146	176	66	4.0
80W	VOE 14595198	147	186	73	4.7
125W	VOE 14595199	178	223	81	8.0

LoCKiNG DEViCES

Designation	Volvo Part No	Description	Length (L) mm	Weight kg

5/8P	VOE 15603422	Locking device, complete*)	42	0.03
5/8R	VOE 15603429	Retainer, standard	22	–

15P	VOE 11417145	Locking device, complete*)	67	0.07
15/20R	VOE 11417316	Retainer, standard	39	–
15/20MR	VOE 11716119	Retainer, heavy duty	39	–

20P	VOE 11417146	Locking device, complete*)	76	0.1
15/20R	VOE 11417316	Retainer, standard	39	–
15/20MR	VOE 11716119	Retainer, heavy duty	39	–

30P	VOE 11417147	Locking device, complete*)	87	0.15
30/40R	VOE 11417317	Retainer, standard	51	–
30/40MR	VOE 11716120	Retainer, heavy duty	51	–

40P	VOE 14524860	Locking device, complete*)	97	0.2
30/40R	VOE 11417317	Retainer, standard	51	–
30/40MR	VOE 11716120	Retainer, heavy duty	51	–

55P	VOE 11417148	Locking device, complete*)	108	0.3
55/65R	VOE 11417318	Retainer, standard	64	–
55/65MR	VOE 11716121	Retainer, heavy duty	64	–

65P	VOE 14524710	Locking device, complete*)	117	0.4
55/65R	VOE 11417318	Retainer, standard	64	–
55/65MR	VOE 11716121	Retainer, heavy duty	64	–

80P	VOE 14524711	Locking device, complete*)	130	0.5
80/125R	VOE 14526513	Retainer, standard	77	–
80MR	VOE 11716122	Retainer, heavy duty	77	–

125P	VOE 14595225	Locking device, complete*)	147	0.8
80/125R	VOE 14526513	Retainer, standard	77	–
80MR	VOE 11716122	Retainer, heavy duty	77	–

*) Locking device complete consists of pin and standard retainer.

Teeth and adapters for excavator buckets

LoCKiNG DEViCES, HoT SLAG

Designation	Volvo Part No	Description	Length (L) mm	Weight kg

30PHS	VOE 15002778	Locking device, complete*)	94	0.2
30/40MRS	VOE 15002854	Retainer, complete, hot slag**)	50	0.03

40PHS	VOE 15002890	Locking device, complete*)	105	0.3
30/40MRS	VOE 15002854	Retainer, complete, hot slag**)	50	0.03

55PHS	VOE 15002928	Locking device, complete*)	117	0.4
55/65MRS	VOE 15002939	Retainer, complete, hot slag**)	62	0.05

65PHS	VOE 15002951	Locking device, complete*)	127	0.5
55/65MRS	VOE 15002939	Retainer, complete, hot slag**)	62	0.05

80PHS	VOE 15002956	Locking device, complete*)	140	0.7
80MRS	VOE 15002958	Retainer, complete, hot slag**)	77	0.09

*) Locking device complete consists of pin, retainer and two springs.

**) Retainer complete consists of retainer and two springs.

Designation	Volvo Part No	Description	Weight kg	For tooth size

5/10T	VOE 11417167	Tool	0.9	5, 8, 10

15/30T	VOE 11417168	Tool	1.1	15, 20, 30

40/55T	VOE 15120568	Tool	1.3	40, 55

65/125T	VOE 14599919	Tool	1.8	65, 80, 125

TooLS FoR MouNTiNG AND REMoVAL

MB MoNoBLoCK TooTH

Designation

Volvo Part No

Cutting Edge Thickness mm

Cutting Edge Angle °

A mm

B mm

Weight kg

MB8

VOE 15603438

250

2.4

Dimensions and weights are approximate.

Changing Volvo teeth

1. Before you start

1 Use a hammer, weight approx. 1 kilo, and protective gear: a hard hat, protective glasses, gloves and work shoes.

Dismantling of teeth

4 Clean the opening for the adapter’s lock pin.
Mounting of teeth

To make work easier, Volvo has developed a special tool. It consists of a handle and a head. The head consists of two pins, one shorter and one longer, as well as a striking surface for each pin. The tool is available in different sizes, depending on tooth size.

3 To make tooth mounting easier, angle back the bucket a

bit so that the adapters face slightly upwards.

5 Place the tool’s longer pin in the opening for the lock pin. Drive out the lock pin using a hammer, so that the lock retainer is removed from its seat. Drive out the lock pin so that it comes out on the underside. Remove the tooth.

Thoroughly clean the adapter’s nose and the hole for the lock pin, so that the tooth and lock pin can be fitted in the correct position.
Fit the tooth on the adapter’s nose, so that the tooth’s guide lugs fit in the adapter’s slots.
Fit the lock pin in the adapter’s nose, so that the arrow on the lock pin faces down and the lock retainer faces forward toward the tip of the tooth. Always use a new lock retainer in the correct size.
Check manually that the lock pin has been moun-

ted correctly.
Drive down the lock pin using a hammer so that the lock pin is flush with the top of the adapter body.