JCB axle and frame parts

The JCB Construction track chain is an important part of the JCB Construction track, it consists of movable elements that are connected together by means of fingers and bushings. It is this part that comes into contact with the ground surface during operation and exerts pressure on it. Using a crawler chain allows you to reduce pressure on the soil, which increases the throughput of JCB Construction Heavy Equipment. The JCB Construction tracks consist of bushes into which the fingers are placed, so joints are formed, allowing the chains to fit tightly the guide and the driving wheel. Like any other equipment, the JCB Construction equipment, over time, requires replacement of worn out JCB Construction parts. If you need to replace spare parts like JCB Construction track chains, you should pay attention to such moments: the length of the crawler chain and the diameter. The JCB Construction track chain can be mounted on motor grader, tractor, bulldozer and excavator JCB Construct →

JCB Construction track shoe - an integral part of the crawler chain JCB Construction construction machines on equipment such as excavators, lifting machines, bulldozers, tractors and more. Designed to reduce the specific pressure of the weight of the base machine on the surface, which ensures patency on weak soils. To work equipped with rubber JCB Construction tracks in urban areas, reducing noise and damage cover (asphalt, concrete and so on). For work in wetland conditions, arched track shoes are used. The JCB Construction shoe track is one of the components of the JCB Construction track. JCB Construction shoes tracks are cast or forged units of wear-resistant steel, having on the outer surface of the lugs on the inner surface - the guide ridges, and apertures which include the teeth of the drive wheels, and lugs, which includes connecting pins pivotally connecting the tracks with each other. According to the constructive implementation of the JCB Construction links, there are com →

JCB Construction Bottom Roller is a crawler drive element that is a movable support for a JCB Construction equipment (a tractor, bulldozer, excavator, etc.) that use JCB Construction track chains. The part is to be installed with JCB Construction bearings on the axles to the suspension of the running gear. JCB Construction bottom rollers are mounted on bearings on axles that are connected to the body through a suspension. In order to mitigate impacts on the JCB Construction during the movement in a rough terrain, the JCB Construction rollers are usually made rubberized. It can also be made of composite materials. JCB Construction bottom rollers have an internal design based on a coil or cylindrical roller bearings. Thick-walled outer ring allows to withstand high radial loads. Types of JCB Construction Bottom Rollers: - Rubberized; - Not rubberized; - Rollers with internal cushioning. JCB Construction Bottom roller supports the following functions: - Improvement of →

The JCB Construction top roller is part of the moving part of the JCB Construction track. Its purpose is to ensure minimum sagging of the upper part of the JCB Construction track. JCB Construction top rollers are made of steel and are used to support the upper section of the track in the track chassis, which includes several supporting JCB Construction top rollers. They are located on the carrier, respectively, are installed on both sides, between the JCB Construction drive and return wheels. The JCB Construction top roller for supporting the tracks and chassis includes a bearing block with a roller. This mechanism, which has the ability to rotate, connects to the suspension unit suspension JCB Construction undercarriage. The JCB Construction top roller (JCB Construction roller, JCB Construction upper roller) is a JCB Construction track element designed to support the upper part of the JCB Construction track and to facilitate tension that reduces sagging. The use of a lot support ro →