Epiroc Drill Rigs parts
Epiroc is a one of the leading drill rig manufacturers in the world. Only there you can find and order online Epiroc Drill Rigs parts.
Any nesessery Epiroc spare parts for:
- Dimension stone equipment
- Exploration drilling rigs
- Face drill rigs (Jumbos)
- Energy drilling rigs
- Production drill rigs
- Rotary blasthole drill rigs
- Surface drill rigs
- Well drilling rigs
Rock drilling rigs for many applications
Epiroc offer rock drilling machines and other equipment for many different applications. For example; oil and gas, construction drilling, quarrying, surface mining, underground mining, exploration drilling and dimension stone industry applications.
“Smart mining” – safer, leaner and greener operations with semi- or fully automated processes
As a leading supplier of rock excavation equipment for more than 145 years, Epiroc have gained considerable experience and knowledge of mining techniques that are practiced across the globe. Today, in addition to providing a broad spectrum of products, from loaders and trucks, surface drill rigs, face drilling rigs to blast hole drilling rig and production drill rigs.
If you are looking for Epiroc spare parts for the Boyles C5/C5C, you will find them in our online Epiroc spare parts shop.
Boyles C5/C5C
- Small and compact
- Designed for sturdiness and operation in harsh environments
- Safety in mind
Product description
The Boyles C5/C5C surface core drilling rig is compact, yet powerful. Its compact design makes it easy to position and transport, even by helicopter. During helicopter transport, the rig is broken down into six main modules and each module is equipped with lifting points to ensure safe and effective transport. A sturdy and robust design enables continuous operation in remote locations and harsh operating environments. All drilling functions are performed, using the ergonomic and user-friendly control panel which also displays all the drilling parameters necessary to ensure productive drilling. The rig is equipped with the Durahead 2-gear drive rotation unit that provides the necessary torque and rpm speed ranges for cori →
If you are looking for Epiroc spare parts for the Christensen 140, you will find them in our online Epiroc spare parts shop.
Christensen 140
- Safety on-site thanks to compliance with the latest EN 16228 safety standards
- High productivity through a new two gear rotation unit which allows increased time between overhaul with minimal maintenance
- High efficiency thanks to a sturdy mast capable of handling 6 meter core barrels
Product description
The Christensen surface core drilling rigs have a well-earned reputation for reliability when it comes safety and performance. Large core samples, a gear driven rotation unit and a constant penetration rate allow the Christensen 140 to boost your productivity and profits. The durable Christensen 140 rig is also designed to help you meet tough environmental protection demands anywhere in the world.
Quick facts
Main application area: Surface exploration
Drilling method: Surface core drilling
Drilling diameters: B, N, H, P
Max →
If you are looking for Epiroc parts for the Christensen CT20, you will find them in our online Epiroc spare parts shop.
Christensen CT20
- Safety is ensured thanks to safety guards around hot or moving parts
- Powerful drilling thanks to a large drilling depth capacity and feed system
- High efficiency thanks to a sturdy mast capable of handling six meter core barrels
Product description
Christensen CT20 has a drilling depth capacity of 2 450 meters. The rig comes truck-mounted or crawler-mounted, which means it can be easily transported. Despite its power, the Christensen CT20 is easy to run thanks to an intuitive control panel which makes it easy to operate the numerous functions. The work environment around the Christensen CT20 has also been a focus throughout the development process. For example, the Tier 4 version of this rig is equipped with a sound reducing engine canopy.
Quick facts
Main application area: Surface exploration
Drilling method: Surface core drilli →
If you are looking for Epiroc parts for the SpeedROC D30, you will find them in our online Epiroc spare parts shop.
SpeedROC D30
Surface drill rig for the dimension stone industry
- Tailor-made for the dimension stone industry
- Drills straight holes just 8 cm from the ground to the hole center
- Quick positioning time and low fuel consumption
Product description
SpeedROC D30 is a versatile and flexible drill rig, tailor-made for the dimension stone industry. It is capable of drilling straight, vertical and horizontal holes that enable wire cutting. Tramming, rotation and feed is powered by an on-board engine. Together with a well-matched, external compressor unit, they run the down-the-hole hammer. SpeedROC D30's special design makes it capable of drilling horizontal holes with minimum ground clearance from both right and left directions.
TECHNICAL DATA
Main application area: Dimension stone industry
Drilling method: Tophammer
Rock drill/ DTH hammer size: COP →
If you are looking for Epiroc spare parts for the SpeedROC 3F, you will find them in our online Epiroc spare parts shop.
SpeedROC 3F
- Three rock drills for high productivity
- 360° carrier rotation and extensive boom reach means large coverage area
- High capacity dust collector for a better working environment
Product description
SpeedROC 3F from Epiroc is the latest generation of drill rigs for the dimension stone quarrying industry. It’s three rock drills makes SpeedROC 3F an efficient and productive drill rig for drilling granite, limestone, marble, and sandstone.
The feeds and rails are built around a whole new architecture to reduce weight. This means that SpeedROC 3F uses the same well-proven carrier model as the SpeedROC 2F which keeps the total cost of ownership to a low level.
The SpeedROC 3F comes with a high capacity dust collector to ensure a good working environment. All dust is collected in a built-in deposit which can be released when requir →
If you are looking for Epiroc spare parts for the SpeedROC 2FA, you will find them in our online Epiroc spare parts shop.
SpeedROC 2FA
A versatile hydraulic drill attachment for a crawler track excavator. Once attached it is the perfect drilling solution even for the toughest quarry conditions
- Fast drilling and positioning gives high productivity
- Safety first with radio remote controlled positioning and drilling operations
- Good working environment with dust collection system (DCT) or water mist (option)
Product description
SpeedROC 2FA is equipped with two hydraulic rock drills with flexible drilling capacity. This means excellent results in both bench drilling and block dressing. This is a flexible solution because the attachment can be mounted on all the main excavator models. Since we always put safety first, the SpeedROC 2FA can be radio remote controlled for both drilling and positioning. Even the tramming operations on your excavator can be controlled by our →
If you are looking for Epiroc parts for the SpeedROC 2F, you will find them in our online Epiroc spare parts shop.
Product description
Reliable SpeedROC 2F is a productive drill rig for the dimension stone industry. It is highly productive thanks to its long reach and fast positioning. This versatile machine has a flexible drilling capacity and excellent tramming stability. It is the perfect choice for granite, marble and limestone quarries.
TECHNICAL DATA
Main application area: Dimension stone industry
Drilling method: Tophammer
Rock drill/ DTH hammer size: DF 500X ; DF 530X
Hole diameter: 28 mm - 45 mm
Maximum hole depth: 9 m
Engine: 139 kW
Cabin: Yes
Air capacity (FAD): 28,31 l/s
@ pressure: 8 bar
Note: Product variations apply. See brochure for more information.
TRANSPORT DIMENSIONS:
Height: 3 300 mm
Length: 11 000 mm
Width: 2 550 mm
Weight: 26 100 kg
Weight: 5 900 kg
→
If you are looking for Epiroc spare parts for the SpeedROC 1F, you will find them in our online Epiroc spare parts shop.
SpeedROC 1F
Surface drill rig for the dimension stone industry
- Tailor-made for the dimension stone industry
- Parallel and straight holes means high quality output
- High drilling capacity means excellent productivity
Product description
SpeedROC 1F is a high quality, high capacity hydraulic tophammer drill rig for the dimension stone industry. This compact, four-wheel drive rig, is tailor-made for marble, granite and sandstone quarries. It is capable of drilling exceptionally straight, vertical as well as horizontal holes. Combining the rig’s stability with an anti-jamming system and guide rails, ensures holes are parallel to each other and perfectly aligned. Thanks to its high production capacity and low fuel consumption, the rig assures a very low total cost of ownership. The rig is equipped with a cable remote control as an option which all →