JCB power transmission
If you are looking for original or aftermarket JCB power transmission system parts, in our online JCB parts store that you can buy online parts for such components, namely JCB power transition system as:
- Gearbox
- Hydrostatic drive
Order or buy online JCB spare part for in our parts store.
The JCB Construction Final Drive is a design made up of gears and other operating elements that are driven by a gear train.
The simplest JCB Construction Final Drive consists of a carrier. It is designed to fix the satellites relative to each other so that they move together.
For proper operation of the JCB Construction Final Drive, it is necessary that one of the constituent parts of it is rigidly fixed to the casing. In the JCB Construction Final Drive, which is equipped with a carrier, the static part is exactly it. In addition, the crown or solar gear may be rigidly fixed. In the event that none of the parts of this unit is fixed, it is possible to separate one movement into several, or merge the two into one.
Due to this design, the drive and driven shafts of the JCB Construction moving in one direction.
Serves the JCB Construction Final Drive to ensure a lower gear and at the same time increase the torque. To ensure the operation of this mechanism, the rotating shaft →
The JCB Construction Travel Motor is a design made up of gears and other operating elements that are driven by a gear train.
The simplest JCB Construction Travel Motor consists of a carrier. It is designed to fix the satellites relative to each other so that they move together.
For proper operation of the JCB Construction Travel Motor, it is necessary that one of the constituent parts of it is rigidly fixed to the casing. In the JCB Construction Travel Motor, which is equipped with a carrier, the static part is exactly it. In addition, the crown or solar gear may be rigidly fixed. In the event that none of the parts of this unit is fixed, it is possible to separate one movement into several, or merge the two into one.
Due to this design, the drive and driven shafts of the JCB Construction moving in one direction.
Serves the JCB Construction Travel Motor to ensure a lower gear and at the same time increase the torque. To ensure the operation of this mechanism, the rotating s →
Rotation of the working equipment of equipment to the place of unloading the bucket and a reverse rotation to the place of dripping are carried out by turning the turntable or the whole platform (for full-cycle JCB Construction excavators). The rotation takes approximately 60-70% of the working cycle time and significantly affects its overall duration.
The hydrostatic JCB Construction Swing Motor just performs the function of turning in the horizontal plane of the working equipment relative to the running gear of the JCB Construction equipment.
The Swing JCB Construction Motor consists of a sturdy steel casing, in which several pairs of Novikov gearing gears are compactly arranged, allowing the transfer of loads significantly exceeding the permissible values for involuntary engagement. On the low-speed shaft, on the splines, the output gear is attached, which is included in the open gearing with a gear ring of the turntable of the JCB Construction Heavy Equipment.
A large co →