JCB electrical system parts

Modern JCB equipment, is saturated with a large number of electronics, ranging from the illumination of devices and ending with electronic equipment. For the functioning of the entire JCB electrical system, as for any electrical system need wires. JCB wiring comes in 2 types: high and low voltage. The first option is used in the ignition circuit, the second - to connect elements of the onboard JCB electric system. Each wire is a collection of thin copper wires. Insulation is performed by winding JCB wires. The selection of such materials is dictated by the main requirements imposed on wires and JCB wiring harnesses. Among them are: the flexibility of the wires, good conductive properties, resistance of the insulating material, both to high and to too low temperature conditions, non-propagation of the insulation of the combustion process, resistance to aggressive media such as gasoline or oil. JCB wiring is a collection of wires that are bundled together. In this case, the most →

In JCB electronics, an electronic control unit (ECU) is an embedded system that controls one or more electrical systems or subsystems in JCB technology. ECM (electronic engine control). JCB ECM - Engine Control Module. JCB ECU - Electronic Control Unit - electronic control unit - a general term for any electronic control unit. By types of ECU can be divided into:  - Electronic (ECU), - Engine control unit (ECM) - Combined power transmission control unit - Transmission control unit - Brake control unit - Central control module - Central synchronization module - Main electronic module, - Suspension control module. Taken together, these systems are sometimes referred to as JCB computer hardware. Technically, this is not a single computer, but several blocks. Sometimes a single assembly includes several separate control modules. Modern JCB equipment include up to 80 ECU. Embedded software in an ECU continues to evolve according to quantity, →

Electric JCB Construction battery - a chemical source of current, a source of electro-driving force of reusable action. The main specificity is the reversibility of internal chemical processes. That provides its multiple cyclic use (through charge-discharge) for the accumulation of energy and autonomous power supply of various electrical devices and equipment, as well as to provide backup sources of energy in vehicles and JCB Construction heavy equipment. The most common now are: 1. Lead Acid is the most common type of battery used in JCB Construction's heavy equipment, or as an uninterruptible power supply in emergencies. 2. Nickel-cadmium (NiCd) - the most widely used as a replacement for a standard galvanic cell, also used in JCB Construction electric forklifts and other JCB Construction electrical equipment. 3. Nickel-metal hydride (NiMH) - also used as a replacement for a standard galvanic cell, in electric vehicles. Please note that JCB Construction acid batter →

To convert various types of energy into electrical, special devices are used. One of the simplest mechanisms is the DC JCB Construction generator. The DC JCB Construction generator is a device that converts mechanical energy into electrical energy for further use in an external circuit. The source of mechanical energy in this case can serve as any mechanical effort: the rotation of a special handle, the JCB Construction engine and so on. There are such types of DC JCB Construction generators: self-excitation inclusion and working on the principle of independent inclusion. The methods of excitation depend on the type of power supply of the device. The self-excited JCB Construction generator works from external sources, it can be a rechargeable battery. Unlike JCB Construction alternators (or AC JCB Construction generators), devices with a constant type of electricity need an uninterruptible power supply that constantly directs the DC current to the armature winding. Because of  →

Electrical equipment of any JCB Construction equipment includes an alternator JCB Construction or AC JCB Construction generator - a device that converts the mechanical energy received from a JCB Construction engine into an electrical one. Together with a voltage regulator, it is called an alternator set. JCB Construction alternators are installed on modern JCB Construction equipment. They meet the requirements to the greatest degree. Requirements for the JCB Construction alternator: - the output parameters of the JCB Construction alternator must be such that in any mode of motion of the machinery there is no progressive discharge of the JCB Construction battery; - The voltage in the onboard network of equipment powered by the JCB Construction alternator must be stable over a wide range of speed and load variations. The latter requirement is caused by the fact that the JCB Construction rechargeable battery is very sensitive to the degree of voltage stability. Too low voltage →

As the name suggests, a JCB Construction starter for heavy equipment is used to start an internal combustion engine. To do this, it provides a primary rotation of the crankshaft with the required frequency. The starter is an integral part of the electrical system of any modern JCB Construction equipment. Structurally it is a four-pole DC motor, powered by a JCB Construction battery. The JCB Construction engine generates the energy necessary for the movement of the JCB Construction equipment, due to the speed of the JCB Construction crankshaft. All electrical equipment works from the same energy. In a stationary state, the engine is not capable of delivering either torque or electric energy. In this regard, it is necessary to "untwist" it with a special electric motor - a JCB Construction starter motor, and an external power source - a JCB Construction battery. On motors with diesel power system, as well as on high-power engines, a JCB Construction starter motor with a g →

JCB Construction Sensors have a huge functional load. They are responsible for the serviceability and correct operation of the power unit, as well as provide convenience and performance of the work on the JCB Construction heavy equipment, as well as the safety of the operator of the equipment during direct movement or work. Sensors and devices that perform diagnostics of all mechanisms, aggregates and systems of JCB Construction heavy equipment, are necessary for the timely warning of the operator of possible malfunctions. Data from the JCB Construction sensors monitor the temperature, pressure, position of the parts, fluid levels, and the use of other equipment nodes or devices. Each JCB Construction sensor is responsible for its indicator or parameter. The number of sensors in each, even the smallest JCB Construction machine, is extremely large. The variety of functionality of JCB Construction sensors is enormous, as is the importance of each of them in the performance of JC →